China Used Noise Source Agilent 346A Manufacturers Factory Suppliers
-
Used Noise Source Agilent 346A
The very small change in reflection coefficient (<0.01) from ON to OFF is designed especially for accurate characterization of input-impedance-sensitive devices (like GaAsFETs and many UHF...
-
Used Phase Noise Analyzer Rohde & Schwarz FSWP8
The FSWP8 Phase Noise Analyzer does not require external reference sources. Its internal local oscillator surpasses almost any generator available on the market when it comes to phase noise...
-
Used Phase Noise Analyzer Rohde & Schwarz FSWP26
For high-end applications, the Rohde & Schwarz FSWP26 can be equipped with a second receive path, which enables cross-correlation and, depending on the number of correlations used, increases...
-
Used Signal Source Analyzer Rohde & Schwarz FSUP26
Use the FSUP26 to measure phase noise and when characterizing oscillators, measure tuning slope, transient response, power, harmonics and spurious emissions, as well as amplifier noise.
-
Used Noise Figure Meter Agilent N8974A
The Agilent N8974A offers simultaneous noise figure and gain measurements with the ability to view, print and save the data/display in multiple formats.
-
Used Noise Figure Analyzer Agilent N8973A
The Keysight N8973A offers simultaneous noise figure and gain measurements with the ability to view, print and save the data / display in multiple formats.
-
Used Noise Source Agilent N4001A
●Frequency Range: 10 MHz - 18 GHz
●Nominal ENR 15dB
●Electronic storage of Excess Noise Ratio (ENR) calibration data decreases the opportunity for user error -
Used Phase Noise Analyzer Agilent E5503B
By building upon 30 years of Agilent Technologies low phase noise, RF design and measurement experience, the Agilent E5503B solution continues to provide excellent measurement integrity,...
-
Used Signal Source Analyzer Agilent E5052A
The Keysight E5052A has a frequency range that can be extended up to 26.5 GHz with the Agilent E5053A, and up to 110 GHz with the E5053A plus Keysight 11970 (Agilent) series mixers.
-
Used Noise Figure Test Agilent 8971C
When paired with the measurement modes in an 8970B, double down-conversion is possible because the 8971C acts as the second downconverter.
-
Used Noise Figure Meter Agilent 8970B
RF and microwave (with external local oscillator, sold separately) measurements from 10MHz to at least 26.5GHz are equally simple; any IF between 10 and 1500 MHz may be used.
-
Used Noise Source Agilent 346B
The low SWR of the Keysight 346B noise source reduces a major source of measurement uncertainty; reflections of test signals. The 346B's high ENR, low SWR, and variety of connectors make it a...
Contact Now Used Noise Source Agilent 346A The very small change in reflection coefficient (0.01) from ON to OFF is designed especially for accurate characterization of input-impedance...
The 346A is a used 18 GHz Noise Generator from Agilent. A noise signal generator is a type of electronic test equipment that produces a noise, or random signal, to test an electronic...
The Agilent 346A noise source is the ideal companion to Agilent noise figure solutions. Since it is broadband (10 MHz to 18 GHz), it eliminates the necessity for several sources at different...
item 2 hp agilent 11711a noise source adaptor 346b opt k11 sold as is 2 - hp agilent 11711a noise source adaptor 346b opt k11 sold as is $30.00 item 3 Used Good Agilent HP 346A Noise Source, 10MHz to...
The Agilent/Keysight Technologies 346A Noise Source, 10 MHz to 18 GHz, Nominal ENR 6 dB, Refurbished is the ideal companion to Keysight's noise...
The Keysight 346A noise source is the ideal companion to Keysight's noise figure solutions. Since it is broadband (10 MHz to 18 GHz), it eliminates the necessity for several sources at different...


