Products

• Used Noise Figure Meter Agilent N8974A

  The Agilent N8974A offers simultaneous noise figure and gain measurements with the ability to view, print and save the data/display in multiple formats.

• Used Noise Figure Analyzer Agilent N8973B

  Default noise figure settings offer simultaneous noise figure and gain measurements. By using Table view several measurements including Noise Figure, Noise Factor, Y-Factor, Gain, Phot, Pcold, and...

• Used Noise Figure Analyzer Agilent N8973A

  The Keysight N8973A offers simultaneous noise figure and gain measurements with the ability to view, print and save the data / display in multiple formats.

• Used Noise Source Agilent N4002A

  The Keysight N4002A (Agilent) Noise Source is perfect for general purpose use with a low reflection coefficent and a nominal ENR of 15 dB from 10 MHz to 26.5 GHz. DUT's with noise figures up to 30...

• Used Noise Source Agilent N4001A

  ●Frequency Range: 10 MHz - 18 GHz
  ●Nominal ENR 15dB
  ●Electronic storage of Excess Noise Ratio (ENR) calibration data decreases the opportunity for user error

• Used Noise Source Agilent N4000A

  DUT's with noise figure up to 20 dB can be accurately and reliably measured with this device. The N4000A noise sources has a choice of connectors, with an APC 3.5(mm) connector as standard.

• Used Phase Noise Analyzer Agilent E5503B

  By building upon 30 years of Agilent Technologies low phase noise, RF design and measurement experience, the Agilent E5503B solution continues to provide excellent measurement integrity,...

• Used Microwave Downconverter Agilent E5053A

  When configured with the Agilent E5053A microwave downconverter, the E5052A and E5052B SSA offers exceptional phase noise sensitivity up to 26.5 GHz.

• Used Signal Source Analyzer Agilent E5052B

  The E5052B SSA is suitable for use in a wide range of applications including RF/uW/mmW oscillators, VCO's, system reference clocks, LAN modules, high-speed timing modules, SerDes chips, and...

• Used Signal Source Analyzer Agilent E5052A

  The Keysight E5052A has a frequency range that can be extended up to 26.5 GHz with the Agilent E5053A, and up to 110 GHz with the E5053A plus Keysight 11970 (Agilent) series mixers.

• Used Noise Figure Test Agilent 8971C

  When paired with the measurement modes in an 8970B, double down-conversion is possible because the 8971C acts as the second downconverter.

• Used Noise Figure Meter Agilent 8970B

  RF and microwave (with external local oscillator, sold separately) measurements from 10MHz to at least 26.5GHz are equally simple; any IF between 10 and 1500 MHz may be used.