Products

• Used Noise Source Agilent 346C

  The Keysight 346C (Agilent) Noise Source is the ideal companion to Agilent's noise figure solutions. Since it is broadband (frequency range of 10 MHz to 26.5 GHz), it eliminates the necessity for...

• Used Noise Source Agilent 346B

  The low SWR of the Keysight 346B noise source reduces a major source of measurement uncertainty; reflections of test signals. The 346B's high ENR, low SWR, and variety of connectors make it a...

• Used Noise Source Agilent 346A

  The very small change in reflection coefficient (<0.01) from ON to OFF is designed especially for accurate characterization of input-impedance-sensitive devices (like GaAsFETs and many UHF...

• Used Dynamic Signal Analyzer SR785

  The SR785 is an ideal instrument for analyzing both mechanical and electrical systems. For measurements involving servo systems, control systems, acoustics, vibration testing, modal analysis, or...

• Used Dynamic Signal Analyzer SR780

  Whether your application involves acoustic measurements, vibration testing, servo systems or filter design, the SR780’s features, performance and low cost are unmatched.

• Used Dynamic Signal Analyzer Agilent 35670A

  Measurements: Linear, Cross, and Power Spectrum, Power Spectral Density, Frequency Response, Coherence, THD, harmonic power, Time Waveform, Auto-correlation, Cross-Correlation, Histogram, PDF, CDF

• Used Dynamic Signal Analyzer Agilent 3561A

  The DC to 100kHz frequency range, 150 dB measurement range and 80 dB dynamic range of the analyzer make it a powerful solution for testing and analysis in electronics, mechanics and...

• Used Audio Analyzer Rohde & Schwarz UPV

  The R&S UPV performs nearly all measurements that occur in the audio world, ranging from frequency response measurements through distortion and spectral display to the analysis of digital interfaces.

• Used Audio Analyzer Agilent U8903B

  The loopback capability allows the uplink signal to be looped back at the U8903B and sent to the DUT, ensuring that both the uplink and downlink are tested at the same time.

• Used Audio Analyzer Agilent U8903A

  Across the audio spectrum and beyond, this scalable, single-unit solution provides versatile measurement functions, diverse test signals and powerful analysis capabilities.

• Used Audio Analyzer Agilent 8903B

  The Agilent / HP 8903B Audio Analyzer contains a low distortion programmable source, provides rms, average, and quasi-peak detection and is fully programmable (HP-IB).

• Used Audio Analyzing Multimeter Keithley 2015-P

  ●THD, THD+Noise, and SINAD measurements
  ●20 Hz to 20 kHz sine wave generator
  ●4 Vrms single ended or 8 Vrms differential output
  ●13 Digital Multimeter functions 6 1/2 digits