Products

• Used Calibration Kit Agilent 85033C

  The HP Agilent 85033C is a Calibration Kit that contains precision 3.5 mm standards used to calibrate the 8753X Network Analyzer.

• Used Calibration Kit Agilent 85032B

  ​The Agilent 85032B calibration kit contains precision 50 ohm type-N standards used to calibrate Agilent network analyzers for measurement of devices with 50 ohm type-N connectors.

• Used Calibration Kit Agilent 85032A

  The Agilent / HP 85032A Calibration Kit (type N) is used with the S-Parameter Test Sets. The kit contains two APC-7 to N(M) Adapters, two APC-7 to N(F) Adapters, one N(M) Load, one N(F) Load, one...

• Used Calibration Kit Agilent 85031B

  ​The Agilent 85031B calibration kit contains a set of precision 7 mm fixed terminations and a one-piece open/short circuit used to calibrate Agilent network analyzers for measurement of devices...

• Used Network Analyzer Rohde & Schwarz ZVA67

  The ZVA67 is ideal for filter measurements requiring maximum dynamic range to linear and nonlinear measurements on amplifiers, mixers, as well as receivers and transceivers.

• Used Network AnalyzerRohde & Schwarz ZVA50

  The ZVA50 is ideal for filter measurements requiring maximum dynamic range to linear and nonlinear measurements on amplifiers, mixers, as well as receivers and transceivers.

• Used Network Analyzer Agilent N5250C

  ●10 MHz - 110 GHz single-sweep frequency range
  ●25 dB micrometer attenuator on port 1
  ●64 channels with 20,001 measurement points per trace
  ●Data-based calibration standards...

• Used Network Analyzer Agilent N5247B

  When you’re characterizing active devices, the right mix of speed and performance gives you an edge. In R&D, the Keysight N5247B provides a level of measurement integrity that helps you transform...

• Used Network Analyzer Agilent N5247A

  The N5247A provides high-power sources and the best linear receivers available (at time of product introduction), giving it the most accurate S-parameter measurements with the widest power range...

• Used Network Analyzer Agilent N5245B

  When you’re characterizing active devices, the right mix of speed and performance gives you an edge. In R&D, the Keysight N5245B provides a level of measurement integrity that helps you transform...

• Used Network Analyzer Agilent N5245A

  ●10 MHz to 50 GHz
  ●2- or 4-ports with two built-in sources
  ●121 to 125 dB system synamic range and 133 to 137 direct receiver dynamic range (depends on configuration)

• Used Network Analyzer Agilent N5244B

  When you’re characterizing active devices, the right mix of speed and performance gives you an edge. In R&D, the Keysight N5244B provides a level of measurement integrity that helps you transform...