Products

• Used Antenna Analyzer Rohde & Schwarz ZVH8

  ●Frequency range from 100 kHz to 8 GHz
  ●100 dB (typ.) dynamic range for filter and antenna isolation measurements
  ●Built-in DC voltage supply (bias) for active components such as...

• Used Antenna Analyzer Rohde & Schwarz ZVH4

  ●Easy handling due to low weight (3 kg with battery) and easy-to-reach function keys
  ●Distance-to-fault measurements
  ●One-port cable loss measurements
  ​●Reflection measurement

• Used FieldFox Network Analyzer Agilent N9928A

  The FieldFox’s four independent, sensitive receivers provide 94 dB of dynamic range for measurement of high rejection, narrowband devices such as cavity filters.

• Used FieldFox Network Analyzer Agilent N9927A

  The FieldFox’s four independent, sensitive receivers provide 94 dB of dynamic range for measurement of high rejection, narrowband devices such as cavity filters.

• Used FieldFox Network Analyzer Agilent N9926A

  It can be configured with VNA transmission/reflection (T/R) capability for S11 and S21 measurements, or with full 2-port capability for measurements of all four S-parameters and full 2-port...

• Used FieldFox Network Analyzer Agilent N9925A

  FieldFox leverages Keysight microwave expertise to deliver consistent measurements with Keysight benchtop VNAs. With the FieldFox N9925A, you can measure the common- and differential-mode...

• Used Network Analyzer Agilent N9923A

  A standard FieldFox RF VNA provides T/R measurements, or S11 and S21, with magnitude and phase. Adding Option 122 (full 2-port S-parameters) allows two-port cal and measurement of all 4...

• Used Handheld Network Analyzer Anritsu MS2036C

  With frequency coverage from 5 kHz to 6 GHz PLUS a Spectrum Analyzer covering 9 kHz to 9 GHz all rolled into a single measurement powerhouse for the harsh RF and physical environments of field test.

• Used Handheld Network Analyzer Anritsu MS2026B

  The Anritsu MS2026B VNA Master easily replaces bulky and obsolete bench-top instruments with a more efficient-to-use handheld instrument, so technicians can freely roam the sites they service.

• Used Calibration Kit Agilent 85052D

  This kit also contains adapters to change the sex of the test port and a torque wrench for proper connection. Included are standards definitions on disk. Connector gauges may be ordered separately.

• Used Calibration Kit Agilent 85033E

  Options are available to add 3.5 mm female to female, 3.5 mm male to male and 3.5 mm female to male adapters. Other options add four 3.5mm to type-N adapters or four 3.5 mm to 7 mm adapters.

• Used Calibration Kit Agilent 85033D

  Option 100 adds phase-matched 7 mm to 3.5 mm adapters with male and female connectors for use with 7 mm test port cables. Option 200 adds four type-N to 3.5 mm adapters.