Product Overview
ROHDE & SCHWARZ FSP40
The Rohde & Schwarz FSP40 Spectrum Analyzer is a wide band, very sensitive receiver. It works on the principle of "super-heterodyne receiver" to convert higher frequencies (normally ranging up to several 10s of GHz) to measurable quantities. The received frequency spectrum is slowly swept through a range of pre-selected frequencies, converting the selected frequency to a measurable DC level (usually logarithmic scale), and displaying the same on the CRT of the Rohde & Schwarz, Inc. FSP40. The CRT displays received signal strength (y-axis) against frequency (x-axis).
Key specifications of the Rohde & Schwarz FSP40 Spectrum Analyzer include:
●Frequency range 9 kHz to 3GHz, 7 GHz, 13 GHz, 30 GHz and 40 GHz
●Resolution bandwidth 1 Hz to 10 MHz
●Displayed average noise level -155 dBm (1 Hz)
●Phase noise -113 dB (1 Hz) at 10 kHz
●Additional filters:
oChannel filters from 100 Hz to 5 MHz and RRC filters
oFFT filters from 1Hz to 30 kHz
oEMI bandwidths and quasi-peak detector
oMeasurement functions for TOI, MC ACP(R), OBW, CCDF, APD, etc
oMeasurement applications for cellular standards and general purpose, e.g. phase noise, noise figure, etc.
Features of the R&S FSP40 Spectrum Analyzer include:
●Full choice of detectors
oMax, Min-, Auto-Peak, Sample, RMS, Average, Quasi-Peak
●CP/ACP/Fast ACP measurement functions with a host of predefined standards
●Multi Carrier ACP measurement with independent inter carrier spacing support
●ACP/MCAP with up to 12 adjacent channels and max hold power function
●Automatic test routines for measuring TOI, OBW, phase noise, and ACP®, AM modulation depth
●Harmonic distortion measurement
●CCDF & APD function (y-unit % possible)
●Editable limit lines including PASS/FAIL indication
RBW-characteristics:
●Digital filters from 10 Hz to 100 kHz (1,3,10 steps)
●Analog filters from 300 kHz to 10 MHz (1,3,10 steps)
●39 channel filters 100 Hz to 5 MHz
●RRC filters (IS-136, TETRA, WCDMA)
●EMI bandwidth standard
●FFT filters 1 Hz to 30 kHz
●10 dB step attenuator (5 dB with FSP-B25)
●Electronic attenuator and preamplifier option
●IF power trigger with sensitivity down to – 50 dBm mixer level
●Gated trigger function
●Full choice of marker functionality
oPhase noise, noise, n dB down / n dB up , Peak list, frequency counter (0.1 Hz in 30ms)
●Internal tracking generator with power sweep support
●External generator control (reverse sweep)
●Extension of frequency range with external mixers with BIAS tuning support whilst trace display is active
●HP 859x/8566/8591E/71100C/71200C/71209C compatible GPIB command set
●FSEx/FSIQ compatible GPIB command set
●List mode for extremely fast GPIB operation
●Ethernet interface (100 Base T)
●21 cm color SVGA TFT Display
●Split screen mode
●Operating system: Embedded Windows XP
oEasy documentation of measurements
oRemote desktop functionality
oCompatibility (printer drivers, network, etc.)
●Interfaces: GPIB, RS-232-C, LAN (option), USB
●VXI-11 remote support
●Wide range of available application firmware including code domain power measurements for 3 GPP communication standards
oBluetooth
oGSM/EDGE
o3 GPP WCDMA, HSDPA, TD-SCDMA
oCDMA2000, 1xEV-DV, 1xEV-DO
oWLAN 802.11a (restricted OFDM spectrum)
oNoise figure and gain measurements
oFM/PM/AM measurement demodulator
oPhase noise measurement
oPower sensor measurement supporting the power sensors R&S NRP-Z11, Z21, Z22, Z23, Z24, Z51, Z55, Z81, Z91, the external power meters R&S NRVD, HP EPM, HP 437B, HP438A and power splitter
Hot Tags: used spectrum analyzer rohde & schwarz fsp40, China, manufacturers, Suppliers, Factory, buy, low price, in stock, Used Spectrum Analyzer Rohde Schwarz FSW50, Used Spectrum Analyzer Rohde Schwarz FSU8, Used Spectrum Analyzer Rohde Schwarz FSP7, Used Spectrum Analyzer Rohde Schwarz FSEM30, Used Spectrum Analyzer Agilent E4411B, Used Spectrum Analyzer Rohde Schwarz FSW43
