Product Overview

RENT Anritsu MS2721B (call for availability)

The Anritsu MS2721B Spectrum Master handheld Spectrum Analyzer is designed to conduct highly accurate analysis on the new wave of wireless LAN and cellular signals, including 802.11a, 3G, ultra-wideband, WiMAX, and wireless medical patient monitoring systems. The MS2721B is ideal for AM and FM broadcast proofing because the wide dynamic range and low phase noise make NRSC measurements on analog and IBOC signals easy with no need for an external carrier notch filter. The MS2721B is a small and easy to use portable spectrum analyzer with unprecedented measurement capability for applications up to 7.1 GHz. Weighing in at less than 7 pounds, it is equally at home on the engineering bench and in the field.

Options for this instrument enable the user to add W-CDMA/HSDPA, CDMA, EDVO, DVB-T/H, ISDB-T, GSM/GPRS/EDGE, TD-SCDMA, Fixed WiMAX and Mobile WiMAX measurements. The tracking generator option delivers specified performance from 400 kHz to 7.1 GHz. A GPS receiver can be added to allow measurements to be location-stamped and to greatly improve time base accuracy. Another option adds spectrogram, signal strength and RSSI. There is an option to add a user definable channel scanner option that is excellent for interference mitigation work in complicated RF environments.

Several smart measurements are built into the Anritsu MS2721B, including channel power, adjacent channel power ratio, Carrier to Interference ratio (C/I), and field strength. In addition, an AM/FM/SSB demodulator is included. Demodulated signals can be monitored using the internal speaker or by using a universal 2.5 mm 3-wire headset, such as used with many cellular phones.

The MS2721B spectrum analyzer has low phase noise of -100 dBc/Hz @ 10 kHz offsets, best in its class typical DANL of -163 dBm in a 1 Hz RBW, resolution bandwidth (RBW) range of 1 Hz to 3 MHz and video bandwidth (VBW) range of 1 Hz to 3 MHz. It also has the fastest sweep speeds of any spectrum analyzer in its class. It automatically sets the fastes possible sweep speed consistent with accurate measurement results.

The use of Compact Flash memory modules or USB Flash Drives up to 2 GB allows an unlimited number of traces and setups to be stored. Measurements may be stored directly to the compact flash module or the USB Flash drive. A 512 MB module will hold over 20,000 Spectrum Analyzer measurements. Remote programming using the Ethernet 10/100 Base-T connection is provided using SCPI programming. The Ethernet connection gives the user flexibility in remotely operating the instrument using Anritsu's remote access software, shipped with the product. Measurements and setups may be uploaded and downloaded using either the Ethernet or the USB connection.

Quasi-peak detection is included along with CISPR resolution bandwidths.

Features of the MS2721B Spectrum Master include:

Handheld, battery-operated design

Large daylight viewable transflective color display

Built in pre-amplifier (standard)

Lightweight at only 6.9 lbs (typical)

Best in class Displayed Average Noise Level < -163 dBm typical in a 1 Hz resolution bandwidth at 1 GHz

Quick Zoom-in, Zoom-out display in 1-2-5 sequence

RBWs: 1 Hz to 3 MHz in 1-3 sequence

VBWs: 1 Hz to 3 MHz in 1-3 sequence

Automatic or manual input attenuator control

Amplitude Accuracy +/- 0.5 dB typical