Products

• Used EMI Test Receiver Rohde & Schwarz ESCI

  ●Total measurement uncertainty < 1 dB
  ●Displayed average noise level (DANL) typ. –155 dBm
  ●1 dB compression point +5 dBm * Pulse-protected RF input
  ●Preselection filters

• Used EMC Analyzer Agilent 8594EM

  The Agilent / HP 8594EM has two modes of operation: EMI analysis and spectrum analysis. With the press of a key, this analyzer converts from EMC analyzer to full-function spectrum analyzer for use...

• Used EMC Analyzer Agilent 8593EM

  The Agilent HP 8593EM has two modes of operation: EMI analysis and spectrum analysis. With the press of a key, this analyzer converts from EMC analyzer to full-function spectrum analyzer for use...

• Used EMC Analyzer Agilent 8591EM

  The Agilent / HP 8591EM has two modes of operation: EMI analysis and spectrum analysis. With the press of a key, this analyzer converts from EMC analyzer to full-function spectrum analyzer for use...

• Used Mulitimeter Agilent U3606A

  Measurements include DC and AC voltage and current, 2-wire and 4-wire milliohm resistance, frequency, capacitance, continuity and diode test. Math functions include Null, dBM, dB, Hold and...

• Used Source Measure Agilent B2912A

  The wide coverage of 210 V, 3 A DC/10.5 A pulse with a single instrument minimizes the investment. Minimum 10 fA/100 nV measurement resolution support accurate characterization of DUT.

• Used Source Measure Agilent B2911A

  Integration of 4 quadrant source and measurement capabilities enables I/V measurement simply and easily without configuring multiple instruments. The wide coverage of 210 V, 3 A DC/10.5 A pulse...

• Used Source Measure Agilent B2902A

  Integration of 4 quadrant source and measurement capabilities enables I/V measurement simply and easily without configuring multiple instruments. The wide coverage of 210 V, 3 A DC/10.5 A pulse...

• Used Source Measure Agilent B2901A

  The wide coverage of 210 V, 3 A DC/10.5 A pulse with a single instrument minimizes the investment. Minimum 100 fA/100 nV measurement resolution support accurate characterization of DUT.

• Used DC Source Agilent 4140B

  The HP 4140B is ideal for making DC characteristic measurements such as leakage current, current/voltage characteristics, and quasi - static C-V measurements.

• Used Remote SourceMeter Keithley 6430

  The high level signals output by the Remote PreAmp are sent to the controlling mainframe via a two-meter cable. This allows the user to make a direct or very short connection to the signal,...

• Used Current Source Keithley 6221

  High sourcing accuracy and built-in control functions make the Keithley 6221 AC and DC Current Source ideal for applications like Hall measurements, resistance measurements using delta mode,...