The Keysight DSOX3012A ( Agilent) is a two-channel model in the InfiniiVision 3000 X-Series. Engineered with breakthrough technology this upgradable oscilloscope provides superior performance and functionality. Its unique 5-instruments-in-one design delivers more scope for the same budget.

Features and Specifications of:

Features of:

●One million waveforms per second update rate

●MegaZoom IV smart memory technology

●Large 8.5-inch WVGA display

●Optional segmented memory

●Industry's first 5-instruments-in-1:

oOscilloscope

oDigital channels

oBuilt-in 20 MHz function/arbitrary waveform generator with modulation

oIntegrated digital voltmeter

oProtocol analyzer

●Investment protection with Industry's only fully-upgradable oscilloscope, including bandwidth up to 1 GHz

●Industry's leading applications solution

Specifications of the Agilent DSOX3012A include:

●Bandwidth (-3 dB): 100 MHz

●Calculated rise time (10 - 90%): ≤ 3.5 ns

●Input channels: 2 analog channels

●Maximum sample rate:

o4 GSa/s half channel

o2 GSa/s all channel

●Maximum memory depth:

oStandard 2 Mpts

oOptional 4 Mpts

oOptional segment memory

●Display size and type: 8.5 WVGA display

●Waveform update rate: > 1 million waveforms per second

●Number of active probes supported: In general, one for 2-channel models

●Vertical system analog channels:

oHardware bandwidth limits: Approximately 20 MHz (selectable)

oInput coupling: AC, DC

oInput impedance: Selectable:

■1 MΩ ± 1% (14 pF)

■50 Ω ± 1.5%

oInput sensitivity range: 1mV/div to 5 V/div (1 MΩ and 50 Ω)

oVertical resolution: 8 bits (measurement resolution is 12 bits with averaging)

oMaximum input voltage:

■300 Vrms, 400 Vpk

■Transient overvoltage 1.6 kVpk

■With N2862A, N2863A, N2890A 10:1 probe: 300 Vrms

■Frequency de-rating (assumes sine wave input): 400 Vpk until 40 kHz, then de-rates at 20 dB/dec until 6 Vpk

oDC vertical accuracy: ±[DC vertical gain accuracy + DC vertical offset accuracy + 0.25% full scale]

oDC vertical gain accuracy: ± 2.0% full scale

oDC vertical offset accuracy: ± 0.1 div ± 2 mV ± 1% of offset setting

oChannel-to-channel isolation: > 100:1 from DC to maximum specified bandwidth of each model (measured with same V/div and coupling on channels)

oOffset range:

■± 2 V (1 mV/div to 200 mV/div)

■± 50 V (> 200 mV/div to 5 mV/div)

●Vertical system digital channels:

oDigital input channels: 16 digital (D0 to D15. pod 1:D7 ~ D0, Pod 2: D15 ~ D8)

oThresholds: Threshold per pod

oThreshold selections: TTL (+1.4 V), 5V CMOS (+2.5 V), ECL (-1.3 V), user-defined (selectable by pod)

oUser-defined threshold range: ± 8.0 V in 10 mV steps

oMaximum input voltage: ± 40 V peak CAT l; transient overvoltage 800 Vpk

oThreshold accuracy: ± (100 mV + 3% of threshold setting)

oMaximum input dynamic range: ± 10 V about threshold

oMinimum voltage swing: 5 mVpp

oInput impedance: 100 kΩ ± 2% at probe tip

oInput capacitance: ~8 pF

oVertical resolution: 1 bit

●Horizontal system analog channels:

oTime base range: 5 ns/div to 50 s/div

oTime base accuracy: 25 ppm ± 5 ppm per year (aging)

oTime base delay time range:

■Pre-trigger: Greater of 1 screen width or 250 μs

■Post-trigger: 1 s to 500 s

oChannel-to-channel deskew range: ± 100 ns

oΔ Time accuracy (using cursors): ± (time base acc. x reading) ± (0.0016 x screen width) ± 100 ps

oModes: Main, zoom, roll, XY

oXY:

■On channels 1 and 2 only, Z Blanking on ext trigger input, 1.4 V threshold

■Bandwidth: Maximum bandwidth

■Phase error at 1 MHz: < 0.5 degree

●Horizontal system digital channels:

oMinimum detectable pulse width: 5 ns

oChannel-to-channel skew:

■2 ns (typical)

■3 ns (maximum)

●Aquisition system:

oMaximum analog channels sample rate:

■4 GSa/s half channel interleaved

■2 GSa/s all channel

oMaximum analog channels record length:

■2 Mpts half channel interleaved, 1 Mpts all channel (standard)

■4 Mpts half channel interleaved, 2 Mpts all channel (optional with DSOX3MEMUP (-040))

oMaximum duration of time captured at highest sampling rate (all analog channels): 500 us with 4M memory upgrade

oMaximum digital channels sample rate: 1 GSa/s

oMaximum digital channels record length:

■1 Mpts (standard with digital channels only)

■2 Mpts (optional with DSOX3MEMUP - with digital channels only)

oModes:

■Normal: Default mode

■Peak detect: Capture glitches as narrow as 250 ps at all time base settings

■Averaging: Selectable from 2, 4, 8, 16, 64, ... to 65,536

■High resolution:

■Real time boxcar averaging reduces random noise and effectively increases vertical resolution

■12 bits of resolution when ≥ 10 μs/div at 4 GSa/s

■or ≥ 20-μs/div at 2 GSa/s

■Segmented:

■Segmented memory optimizes available memory for data streams that have long dead times between activity

■Maximum segments = 1000

■Re-arm time = 1 μs (minimum time between trigger events)

●Trigger system:

oTrigger sources: Analog channel (1~4), digital channel (D0~D15), line, external, WaveGen (1 or mod) (FM/FSK)

oTrigger modes:

■Normal (triggered): requires trigger event for scope to trigger

■Auto : triggers automatically in absence of trigger event

■Single: triggers only once on a trigger event, press [Single] again for scope to find another trigger event, or press [Run] to trigger continuously in either Auto or Normal mode

■Force: front panel button that forces a trigger

oTrigger coupling:

■DC: DC coupled trigger

■AC: AC coupled trigger, cutoff frequency: < 10 Hz (internal);

■High frequency reject: cutoff frequency ~ 50 kHz

■Low frequency reject: cutoff frequncy ~ 50 kHz

■Noise reject:

■Selectable OFF or ON

■Decreases sensitivity 2x

oTrigger holdoff range: 40 ns to 10.00 s

oTrigger sensitivity:

■Internal: < 10 mV/div: greater of 1 div or 5 mV; ≥ 10 mV/div: 0.6 div