The Keysight MSOX3054A (Agilent) is a four-channel model in the InfiniiVision 3000 X-Series. Engineered with breakthrough technology this upgradable oscilloscope provides superior performance and functionality. Its unique 5-instruments-in-one design delivers more scope for the same budget.
Features and Specifications of the Keysight MSOX3054A Oscilloscope include:
Features of the Agilent MSOX3054A include:
One million waveforms per second update rate
MegaZoom IV smart memory technology
Large 8.5-inch WVGA display
Optional segmented memory
Industry's first 5-instruments-in-1:
Oscilloscope
Digital channels
Built-in 20 MHz function/arbitrary waveform generator with modulation
Integrated digital voltmeter
Protocol analyzer
Investment protection with Industry's only fully-upgradable oscilloscope, including bandwidth up to 1 GHz
Industry's leading applications solution
Specifications of the Keysight MSOX3054A (Agilent) include:
Bandwidth (-3 dB): 500 MHz
Calculated rise time (10 - 90%): ≤ 700 ps
Input channels:
4 analog channels
16 digital channels
Maximum sample rate:
4 GSa/s half channel
2 GSa/s all channel
Maximum memory depth:
Standard 2 Mpts
Optional 4 Mpts
Optional segment memory
Display size and type: 8.5 WVGA display
Waveform update rate: > 1 million waveforms per second
Number of active probes supported: In general, one for 2-channel models
Vertical system analog channels:
Hardware bandwidth limits: Approximately 20 MHz (selectable)
Input coupling: AC, DC
Input impedance: Selectable:
1 MΩ ± 1% (14 pF)
50 Ω ± 1.5%
Input sensitivity range: 1mV/div to 5 V/div (1 MΩ and 50 Ω)
Vertical resolution: 8 bits (measurement resolution is 12 bits with averaging)
Maximum input voltage:
300 Vrms, 400 Vpk
Transient overvoltage 1.6 kVpk
With N2862A, N2863A, N2890A 10:1 probe: 300 Vrms
Frequency de-rating (assumes sine wave input): 400 Vpk until 40 kHz, then de-rates at 20 dB/dec until 6 Vpk
DC vertical accuracy: ±[DC vertical gain accuracy + DC vertical offset accuracy + 0.25% full scale]
DC vertical gain accuracy: ± 2.0% full scale
DC vertical offset accuracy: ± 0.1 div ± 2 mV ± 1% of offset setting
Channel-to-channel isolation: > 100:1 from DC to maximum specified bandwidth of each model (measured with same V/div and coupling on channels)
Offset range:
± 2 V (1 mV/div to 200 mV/div)
± 50 V (> 200 mV/div to 5 mV/div)
Vertical system digital channels:
Digital input channels: 16 digital (D0 to D15. pod 1:D7 ~ D0, Pod 2: D15 ~ D8)
Thresholds: Threshold per pod
Threshold selections: TTL (+1.4 V), 5V CMOS (+2.5 V), ECL (-1.3 V), user-defined (selectable by pod)
User-defined threshold range: ± 8.0 V in 10 mV steps
Maximum input voltage: ± 40 V peak CAT l; transient overvoltage 800 Vpk
Threshold accuracy: ± (100 mV + 3% of threshold setting)
Maximum input dynamic range: ± 10 V about threshold
Minimum voltage swing: 5 mVpp
Input impedance: 100 kΩ ± 2% at probe tip
Input capacitance: ~8 pF
Vertical resolution: 1 bit
Horizontal system analog channels:
Time base range: 1 Ns/div to 50 s/div
Time base accuracy: 25 ppm ± 5 ppm per year (aging)
Time base delay time range:
Pre-trigger: Greater of 1 screen width or 250 μs
Post-trigger: 1 s to 500 s
Channel-to-channel deskew range: ± 100 ns
Δ Time accuracy (using cursors): ± (time base acc. x reading) ± (0.0016 x screen width) ± 100 ps
Modes: Main, zoom, roll, XY
XY:
On channels 1 and 2 only, Z Blanking on ext trigger input, 1.4 V threshold
Bandwidth: Maximum bandwidth
Phase error at 1 MHz: < 0.5 degree
Horizontal system digital channels:
Minimum detectable pulse width: 5 ns
Channel-to-channel skew:
2 ns (typical)
3 ns (maximum)
Aquisition system:
Maximum analog channels sample rate:
4 GSa/s half channel interleaved
2 GSa/s all channel
Maximum analog channels record length:
2 Mpts half channel interleaved, 1 Mpts all channel (standard)
4 Mpts half channel interleaved, 2 Mpts all channel (optional with DSOX3MEMUP (-040))
Maximum duration of time captured at highest sampling rate (all analog channels): 500 us with 4M memory upgrade
Maximum digital channels sample rate: 1 GSa/s
Maximum digital channels record length:
1 Mpts (standard with digital channels only)
2 Mpts (optional with DSOX3MEMUP - with digital channels only)
Modes:
Normal: Default mode
Peak detect: Capture glitches as narrow as 250 ps at all time base settings
Averaging: Selectable from 2, 4, 8, 16, 64, ... to 65,536
High resolution:
Real time boxcar averaging reduces random noise and effectively increases vertical resolution
12 bits of resolution when ≥ 10 μs/div at 4 GSa/s
or ≥ 20-μs/div at 2 GSa/s
Segmented:
Segmented memory optimizes available memory for data streams that have long dead times between activity
Maximum segments = 1000
Re-arm time = 1 μs (minimum time between trigger events)
Trigger system:
Trigger sources: Analog channel (1~4), digital channel (D0~D15), line, external, WaveGen (1 or mod) (FM/FSK)
Trigger modes:
Normal (triggered): requires trigger event for scope to trigger
Auto : triggers automatically in absence of trigger event
Single: triggers only once on a trigger event, press [Single] again for scope to find another trigger event, or press [Run] to trigger continuously in either Auto or Normal mode
Force: front panel button that forces a trigger
Trigger coupling:
DC: DC coupled trigger
AC: AC coupled trigger, cutoff frequency: < 10 Hz (internal);
High frequency reject: cutoff frequency ~ 50 kHz
Low frequency reject: cutoff frequncy ~ 50 kHz
Noise reject:
Selectable OFF or ON
Decreases sensitivity 2x
Trigger holdoff range: 40 ns to 10.00 s
Trigger sensitivity:
Internal: < 10 mV/div: greater of 1 div or 5 mV; ≥ 10 mV/div: 0.6 div
External:
200 mVpp from DC to 100 MHz
350 mVpp 100 MHz to 200 MHz
Trigger level range:
Any channel: ± 6 div from center screen
External: ± 8 V
Hot Tags: keysight msox3054a, China, manufacturers, Suppliers, Factory, buy, low price, in stock, Used Oscilloscope Agilent DSO7104B, Used Oscilloscope Agilent 54846A, Used Oscilloscope Agilent 54845A, Used Oscilloscope Tektronix DPO71604C, Used Oscilloscope Tektronix DPO4104, Used Oscilloscope Tektronix DPO5054
