The Keysight MSOX4052A is a two-channel model in the InfiniiVision 4000 X-Series, providing innovative touch triggering. It is surprisingly easy to use with its large, state-of-the-art capacitive touch screen. The MSOX4052A oscilloscope is fully upgradable, including bandwidth, and its unique 5-instruments-in-one design, provides superior performance, speed, and functionality.

Features and Specifications of the Keysight MSOX4052A (Agilent) Oscilloscope include:

Features of the Agilent MSOX4052A include:

One million waveforms per second update rate
MegaZoom IV smart memory technology
Standard segmented memory
Large 12.1-inch capacitive touch display
Interface designed for touch
Innovative InfiniiScan Zone touch triggering
5 instruments in 1, with full upgradability, including bandwidth:

Oscilloscope
Logic analyzer (MSO)
Serial protocol analyzer, including USB (optional)
WaveGen 20 MHz dual channel arbitrary/function generator (optional)
Digital voltmeter (DVM) option:

with 3-digit voltage
with 5-digit frequency counter measurements

Specifications of the Keysight MSOX4052A include:

Bandwidth (-3 dB): 500 MHz
All-channel real-time bandwidth: 500 MHz
Calculated rise time (10 - 90%): ≤ 700 ps
Input channels:

2 analog
16 digital

Maximum sample rate:

5 GSa/s half channel
2.5 GSa/s all channel

Maximum memory depth: Standard 4 Mpts, standard segmented memory
Display size and type: 12.1-inch high-definition capacitive touch display
Waveform update rate: > 1 million waveforms per second
System bandwidth with N2894A standard passive probe: 500 MHz
Vertical system analog channels:

Hardware bandwidth limits: Approximately 20 MHz (selectable)
Input coupling: AC, DC
Input impedance: Selectable:

1 MΩ ± 1% (16 pF)
50 Ω ± 1.5%

Input sensitivity range: 1mV/div to 5 V/div (1 MΩ and 50 Ω)
Vertical resolution: 8 bits (measurement resolution is 12 bits with averaging)
Maximum input voltage:

300 Vrms, 400 Vpk
Transient overvoltage 1.6 kVpk
With N2862A, N2863A, N2890A 10:1 probe: 300 Vrms
Frequency de-rating (assumes sine wave input): 400 Vpk until 40 kHz, then de-rates at 20 dB/dec until 6 Vpk

DC vertical gain accuracy: ± 2.0% full scale
DC vertical offset accuracy: ± 0.1 div ± 2 mV ± 1% of offset setting
Channel-to-channel isolation: ≥ 40 dB from DC to maximum specified bandwidth of each model
Offset range:

± 5 V (< 10 mV/div)
± 20 V (10 to 200 mV/div)
± 75 V (> 200 mV/div)

Vertical system digital channels:

Digital input channels: 16 digital (D0 to D15. pod 1:D7 ~ D0, Pod 2: D15 ~ D8)
Thresholds: Threshold per pod
Threshold selections: TTL (+1.4 V), 5V CMOS (+2.5 V), ECL (-1.3 V), user-defined (selectable by pod)
User-defined threshold range: ± 8.0 V in 10 mV steps
Maximum input voltage: ± 40 V peak CAT l; transient overvoltage 800 Vpk
Threshold accuracy: ± (100 mV + 3% of threshold setting)
Maximum input dynamic range: ± 10 V about threshold
Minimum voltage swing: 500 mVpp
Input impedance: 100 kΩ ± 2% at probe tip
Input capacitance: ~8 pF
Vertical resolution: 1 bit

Horizontal system analog channels:

Time base range: 2 ns/div to 50 s/div
Time base accuracy: ± 10 ppm
Time base delay time range:

Pre-trigger: Greater of 1 screen width or 200 μs (400 μs in interleaving mode)
Post-trigger: 1 s to 500 s

Channel-to-channel deskew range: ± 100 ns
Δ Time accuracy (using cursors): ± 0.001% of reading ± 0.16% screen width ± 30pS
Modes: Main, zoom, roll, XY
XY:

On channels 1 and 2 only
Z Blanking on ext trigger input, 1.4 V threshold
Bandwidth: Maximum bandwidth
Phase error at 1 MHz: < 0.5 degree
Time base: 200 ns/div to 50 ms/div

Horizontal system digital channels:

Minimum detectable pulse width: 2 ns
Channel-to-channel skew:

2 ns (typical)
3 ns (maximum)

Aquisition system:

Maximum analog channels sample rate:

5 GSa/s half channel interleaved
2.5 GSa/s all channel

Maximum analog channels record length:

4 Mpts half channel interleaved
2 Mpts all channel

Maximum digital channels sample rate: 1.25 GSa/s
Maximum digital channels record length: 2 Mpts (with digital channels only)
Modes:

Normal: Default mode
Peak detect: Capture glitches as narrow as 200 ps at all time base settings
Averaging: Selectable from 2, 4, 8, 16, 64, ... to 65,536
High resolution:

Real time boxcar averaging reduces random noise and effectively increases vertical resolution
12 bits: ≥ 50 μs/div
11 bits: ≥ 20 μs/div
10 bits: ≥ 10 μs/div
9 bits: ≥ 5 μs/div

Segmented:

Segmented memory optimizes available memory for data streams that have long dead times between activity
Maximum segments = 1000
Re-arm time = 1 μs (minimum time between trigger events)
Re-arm time when use with the InfiniiScan Zone = 65 us or faster (typical)

Roll:

Displays the waveform moving across the screen from right to left
Available at the time base 50 ms/div or slower

Trigger system:

Trigger sources: Analog channel (1~4), digital channel (D0~D15), line, external, WaveGen (1 or mod) (FM/FSK)
Trigger modes:

Normal: Requires trigger event for scope to trigger
Auto : Triggers automatically in absence of trigger event
Single:

Front panel button that triggers only once on a trigger event
Press [Single] button again for scope to find another trigger event, or press [Run] front-panel button to trigger continuously in either Auto or Normal mode

Force: Front panel button that forces a trigger

Trigger coupling:

DC: DC coupled trigger
AC: AC coupled trigger, cutoff frequency: < 10 Hz (internal); < 50 Hz (external)
High frequency reject: Cutoff frequency ~ 50 kHz
Low frequency reject: Cutoff frequency ~ 50 kHz
Noise reject: