The Keysight N5181B MXG RF Analog Signal Generator, with its pure and precise hardware performance, generates the signals you need for all of your R&D requirements and lets you take your devices and designs to the limit. It provides phase noise, non-harmonics, output power, and much more:
●Test radar receiver sensitivity or characterize ADC or mixer signal-to-noise ratio, with unmatched phase noise and spurious performance
●Drive receiver front-ends for out-of-band rejection with industry-leading output power
●Simulate multi-channel composite analog modulation with integrated multifunction generator
●Create variable RADAR PRI and pulse width with integrated pulse train generator
Features and Specifications of the Keysight N5181B (Agilent) MXG RF Analog Signal Generator include:
●Signal Characteristics:
o9 kHz to 3 or 6 GHz
o+24 dBm specified power to 3 GHz with electronic attenuator
o-146 dBc phase noise at 1 GHz and 20 kHz offset
o- 96 dBc non-harmonics at 1 GHz and > 10kHz offset
●Modulation and Sweep:
oAM, FM, ØM, pulse, and narrow pulse
oPulse train generator
o10 MHz multifunction generator and LF out
oDigital step and list sweep modes
●Automation and Communication Interface:
o1000BaseT LAN, LXI, USB 2.0, and GPIB
oSCPI, IVI-COM, MATLAB drivers
oBackward compatible with ESG, MXG, PSG, and 8648x signal generators
oAgilent USB power sensor compatible with embedded display and SCPI control
●Frequency Specifications:
oFrequency Range:
■Option 503: 9 kHz to 3 GHz
■Option 506: 9 kHz to 6 GHZ
oResolution: 0.01 Hz
oPhase Offset: Adjustable in nominal 0.1 ° increments
oFrequency Switching Speed:
■CW Mode:
■SCPI Mode: ≤ 5 ms, typical
■List /Step Sweep Mode: ≤ 5 ms, typical
oFrequency Reference:
■Accuracy:
■Adustment Resolution: < 1 x1 0^-10, nominal
■Temperature Effects: < ± 2 x 10^-8 from 20 to 30 °C, nominal
■Line Voltage Effects: < ± 1 x 10^-9 for ± 10% change
■Reference Output:
■Frequency: 10 MHz
■Amplitude: ≥ +4 dBm, nominal into 50 Ω load
■External Reference Input:
■Input Frequency, standard: 10 MHz
■Lock Range: ± 1 ppm
■Amplitude: 5 dBm ± 2 dB, nominal
■Impedance: 50 Ω, nominal
■Waveform: Sine or square
oSweep Modes (frequency and amplitude):
■Operating Modes:
■Step Sweep:
■Equally spaced frequency and amplitude or
■Logarithmically spaced frequency steps
■List Sweep: Arbitrary list of frequency and amplitude step
■Sweep Range: Within instrument frequency range
■Dwell Time: 100 μs to 100 s
■Number of Points:
■Step Sweep: 2 to 65535
■List Sweep: 1 to 3201
■Step Change: Linear or logarithmic
■Triggering: Free run, trigger key, external, timer, bus (GPIB, LAN, USB)
●Amplitude Specifications:
oOutput Parameters:
■Settable Range: +30 to –144 dBm
■Resolution: 0.01 dB, nominal
■Step Attenuator: 0 to 130 dB in 5 dB steps electronic type
■Connector: Type N 50 Ω, nominal
oMax Output Power:
■9 kHz to 10 MHz: +13 dBm
■> 10 MHz to 3 GHz: +18 dBm
■> 3 to 5 GHz: +16 dBm
■> 5 to 6.0 GHz: +16 dBm
oMaximum Reverse Power, Nominal:
■< 1 GHz: 50 W
■> 1 to < 2 GHz: 25 W
■> 2 to < 6 GHz: 20 W
■Max DC voltage: 50 VDC
■Trip Level: 2 W
oAmplitude Switching Speed:
■CW Mode:
■SCPI mode: ≤ 5 ms, typical
■Power search SCPI mode: < 12 ms, measured
■List / Step Sweep Mode: ≤ 5 ms, typical
●Spectral Purity Specifications:
oHarmonics:
■9 kHz to 3 GHz: < –35 dBc
■> 3 to 4 GHz: < –35 dBc, typical
■> 4 to 6 GHz: < –53 dBc, typical
oNonharmonics (CW Mode) (Standard (dbc)):
■9 kHz to < 5 MHz: –65, nominal
■5 to < 250MHz: –75
■250 to < 750 MHz: –87
■750 MHz to < 1.5 GHz: –87
■1.5 to < 3.0 GHz: –81
■3 to 6 GHz: –75
oSubharmonics (CW Mode):
■9 kHz to 1.5 GHz: None
■> 1.5 to 3 GHz: –82 dBc (–91)
■> 3 to 6 GHz: –74 dBc (–81)
Hot Tags: used generator agilent n5181b, China, manufacturers, Suppliers, Factory, buy, low price, in stock, Used Signal Generator Agilent 83621B, Used Signal Generator Anritsu 68047B, Used Signal Generator Agilent N5171B, Used Signal Generator Rohde Schwarz SML03, Used Signal Generator Agilent E4422B, Used Signal Generator Rohde Schwarz SMB100A
