Used Network Analyzer Agilent E5061A

Used Network Analyzer Agilent E5061A

●Features:
oEasy to use features
oIntegrated T/R or S-parameter test set
oBuilt-in Visual Basic® for Applications (VBA)

Product Introduction

The Agilent / HP ENA-L RF Network Analyzer is a general purpose analyzer that provides reliable basic S-parameter measurements with easy-to-use features and solid performance based on the latest in modern technologies.


Features and Specifications of:

●Features:

oEasy to use features

oIntegrated T/R or S-parameter test set

oBuilt-in Visual Basic® for Applications (VBA)


●Specifications:

oFrequency:  300 kHz to 1.5 GHz

oImpedance:  50 or 75 Ω test port

oDynamic range:  120 dB

oTrace noise: 0.005 dB rms

oIF bandwidth settings:

■Range:  10 Hz to 30 kHz

■Nominal settings are:  10, 30, 100, 300, 1 k, 3 k, 30 k

oRF connectors:  

■Typ-N, female

■50 Ω or 75 Ω

oExternal trigger connector:

■Type:  BNC, female

■Input Level:

■Low threshold voltage:  0.5 V

■High threshold voltage:  2.1 V

■Input level range:  0 to +5 V

■Pulse width:  ≥ 2 μsec

■Polarity:  Negative (downward) only


oExternal reference signal input connector:

■Type:  BNC, female

■Input frequency:  10 MHz ± 10 ppm

■Input level:  0 dBm ±3 dB

oInternal reference signal output connector:

■Type:  BNC, female

■Output frequency:  10 MHz ± 10 ppm

■Signal type:  Sine wave

■Output level:  0 dBm ±3 dB into 50 Ω

■Output impedance:  50 Ω

oVGA video output:  

■15-pin mini D-Sub, female

■Drives VGA compatible monitors

oGPIB:  

■24-pin D-Sub (type D-24), female

■Compatible with IEEE-488

oParallel port:

■36-pin D-Sub (type 1284-C), female

■Provides connection to printers, or multiport test set


oUSB port:

■Universal serial bus jack, type A configuration (4 contacts inline, contact 1 on left), female

■Provides connection to printers, ECal module, USB/GPIB interface

■Contact 1:  Vcc: 4.75 to 5.25 VDC, 500 mA, maximum

■Contact 2:  -Data

■Contact 3:  +Data

■Contact 4:  Ground

oLAN:

■10/100 BaseT Ethernet, 8-pin configuration

■Auto selects between the two data rates

oHandler I/O port:

■36-pin Centronics, female

■Provides connection to handler system

oLine power (a third-wire ground is required):

■Frequency:  47 Hz to 63 Hz

■Voltage:  90 to 132 VAC, or 198 to 264 VAC (automatically switched)

■VA maximum:  350 VA maximum


Hot Tags: used network analyzer agilent e5061a, China, manufacturers, Suppliers, Factory, buy, low price, in stock, Used Network Analyzer Agilent N5247B, Used Network Analyzer Agilent 8719ES, Used Network Analyzer Agilent N5234A, Used Network Analyzer Agilent 8720D, Used Network Analyzer Rohde Schwarz ZNC3, Used Network Analyzer Agilent N5231B

Send Inquiry

Home

skype

E-mail

Inquiry

Bag